Products

Products

High Reliability Reinforced Isolated Amplifier

NSI1400D-Q1 is a high-performance isolated amplifier with output separated from input based on the NOVOSENSE capacitive isolation technology. The device has a linear differential input signal range of ±250 mV (±320 mV full-scale). The differential input is ideally suited to shunt resistor-based current sensing in high voltage applications where isolation is required. The device has a fixed gain of 8.2 and provides a differential analog output. The low offset and gain drift ensure the accuracy over the entire temperature range. High common-mode transient immunity ensures that the device is able to provide accurate and reliable measurements even in the presence of high-power switching such as in motor control applications. The fail-safe functions including input common-mode overvoltage detection and missing VDD1 detection simplify system-level design and diagnostics.

Product Features

• Up to 5000 Vrms Insulation voltage

• ±250 mV linear Input Voltage Range

• Fixed Gain of 8.2

• Excellent DC Performance:

○ Offset Error: ±0.5 mV (Max)

○ Offset Error Drift: ±4 μV/°C (Max)

○ Gain Error: ±0.3% (Max)

○ Gain Error Drift: ±30 ppm/°C (Max)

○ Nonlinearity: ±0.05% (Max)

○ Nonlinearity Drift: ±1 ppm/°C (Typ)

• SNR: 72 dB (Typ, BW=100 kHz)

• Wide bandwidth: 220 kHz (Typ)

• High CMTI: 125 kV/μs (Typ)

• System-Level Diagnostic Features:

○ VDD1 monitoring

○ Input common-mode overvoltage detection

• Operation Temperature: -40°C ~125°C

• AEC-Q100 qualified for automotive applications: Grade 1

• RoHS-Compliant Packages: SOW8 wide body (SOP8 300mil)

Safety Certificate

• UL recognition: SOW8:  5000 Vrms for 1 minute per UL1577

• CQC certification per GB4943.1

• CSA component notice 5A

• DIN EN IEC 60747-17 (VDE 0884-17)

Application

• On Board Chargers

• DC/DC Converters

• Charging Piles

• Traction Inverters

Functional Block Diagram

image.png

For more product information, please contact us.