The battery management system (BMS) is the "center" of the entire battery pack, which is responsible for monitoring the running status of each battery cell in the pack to ensure its safe and reliable operation. It monitors and collects the running parameters of the battery in real time for SOx analysis and calculation, and realize effective control of the battery based on specific protection control strategies, so as to ensure the safe and reliable operation of the entire battery system. At the same time, BMS interacts with other external devices through its own interface to establish linkage control of other systems and ensure the safe, reliable and efficient operation of the power supply system.
Insulation detection
Relay/Pyrofuse drive
Voltage sensing
BMS current sensing
BMS current sensing
Power
Isolated communication
Interface
MCU monitor
Analog input
Sensor
HV interlock
Thermal run away detection
Relay/Pyrofuse drive
Smart High & Low Side Switch
Smart Low Side Switch
NSE11409
Automotive 40V Single Channel 90mΩ Smart Low Side Switch
Voltage sensing
Isolated Sampling
Isolated ADC
NSI1306M25
Isolated Current Sampling ADC with High Reliability
BMS current sensing
Isolated Sampling
Isolated Current Amplifier
NSI1300D25
Isolated Current Sampling Amplifier With High Reliability
Isolated Voltage Amplifier
NSI1311-Q1
Isolated Voltage Sampling Amplifier With High Reliability
Power
Low Dropout Regulator
≥10V Low Iq LDO
NSR35xxx
Automotive-qualified 40V 500mA ultra-low quiescent current LDO
NSR33xxx
Automotive-qualified 40V 300mA ultra-low quiescent current LDO
NSR31xxx
Automotive-qualified 40V 150mA ultra-low quiescent current LDO
Isolated communication
Digital Isolator
General Digital Isolator
NSI822x-Q1
Automobile-qualified high-reliability dual-channel digital isolator
NSI824x
High-reliability four-channel digital isolator
Interface
CAN/LIN Transceiver
CAN Transceiver
NCA1145-Q1
Automotive-grade high-speed CAN FD transceiver with remote wake up and fault protection
NCA1042B-Q1
Automotive Fault Protected High-Speed CAN FD Transceiver with Standby Mode
NCA1051A-Q1
Automotive Fault Protected High-Speed CAN FD Transceiver
Sensor
Current Sensor
Linear Current Sensor
NSM2033
NSM2033: Linear Hall Current Sensor
NSM2032
NSM2032: Linear Hall Current Sensor
NSM2031
NSM2031: Linear Hall Current Sensor
Thermal run away detection
Pressure Sensor
MEMS Pressure Sensor
NSPAS1
Automotive-qualified Integrated Absolute Pressure Sensor
Thank you for your inquiry.
Please provide the following information and we will contact you as soon as possible, thank you.
